Refinishing

Installation

Hardwood Supply

Custom Border Inlays

(484) 354-8869

If your floors look dull, scratched, or worn, professional hardwood floor refinishing in West Chester, PA can make them look new again without replacing a single board. But if you’ve never had it done, it’s natural to wonder what actually happens when the crew arrives, and how much of your home it will take over.

At Barbati Hardwood Flooring, we’ve been refinishing floors in West Chester and throughout Chester County since 1987, and more than 90 percent of our business comes from repeat customers and referrals. Here’s a clear walk-through of how a typical refinishing project works.

Key Takeaways

  • Refinishing removes the worn finish and surface wear, then applies new stain (if you want a color change) and fresh protective coats.
  • It starts with a walkthrough so we can look at the floor’s condition and talk through color and finish.
  • Finishes need time to dry and cure. Oil-based polyurethane is usually walkable after about 24 hours, but furniture should wait about 3 days.
  • Our site lists refinishing at about $3 to $4 per square foot, depending on the condition of the floor.
  • Good preparation on your end makes the project smoother for everyone.

What Does Hardwood Floor Refinishing in West Chester, PA Involve?

Refinishing is the process of restoring a hardwood floor’s surface. The old finish and surface wear are sanded away to bare wood, the floor is stained if you want a new color, and several coats of protective finish are applied. The result is a floor that looks fresh and is protected for the years ahead. It is one of the most cost-effective ways to renew a home’s floors, especially older homes with solid hardwood.

What Happens at the First Walkthrough?

Every project starts with a visit. We look at the condition of your floors, check for areas that need attention, and talk about what you’d like: a similar color, something lighter or darker, or a different look entirely. This is also the time to ask questions and to find out what to expect for scheduling. If you’d like to see the process in more detail, visit our hardwood floor refinishing page.

How Should You Prepare Your Home?

The rooms being refinished need to be completely empty, so furniture, rugs, and decor all have to move out. It also helps to plan for pets and kids, since they’ll need to stay off the floors while the work is underway. Taking a little time to organize before we arrive makes the whole project easier.

What Happens During Sanding?

Sanding is the step that does most of the work. The old finish, along with scratches and surface wear, is removed so the floor has a clean, even surface for the new finish to bond to. Floors are typically sanded in stages, starting with a coarser grit and moving to finer ones, to leave a smooth result. Sanding is also when we get a clear view of the floor’s overall condition.

How Does Staining Work?

If you want a new color, stain goes on after sanding and before the finish. The wood species matters here, because the same stain can look different on different woods. We always recommend testing a sample on your own floor first. For more on choosing a color, see our page on staining your hardwood floors. Many homeowners also choose to keep the wood’s natural color and skip stain altogether.

What Finish Goes On, and How Long Does It Take to Dry?

We use high-grade polyurethane to protect your floors, and we do not use harmful acrylics. The finish goes on in coats, and each coat needs time to dry before the next one.

Drying times depend on the type of finish. Water-based finishes dry in about an hour per coat. Oil-based polyurethane is typically walkable after about 24 hours, or an extra day in rainy or very humid weather, and it’s best to wait about 3 days before moving furniture back in. We’ll go over the schedule for your specific floor so you know when you can use each room again.

How Much Does Professional Hardwood Floor Refinishing Cost?

Our site lists refinishing at about $3 to $4 per square foot, depending on the condition of the floor. Floors with deep damage or heavy wear may need more attention, which can affect the price. The most accurate number comes from an in-person look, and our estimates are free.

FAQ

How often should hardwood floors be refinished?

It depends on how much traffic the floor gets and how well it’s cared for. Many floors go years between refinishing. A good sign it’s time is when the finish looks worn or dull in high-traffic areas, or when scratches have gone through to the wood.

Can I stay in my house during refinishing?

Many homeowners do, but you’ll need to stay off the floors being refinished and plan around the drying time. We’ll talk through the logistics at your walkthrough.

Will refinishing change the color of my floor?

It can, if you choose a new stain. If you prefer your floor’s natural look, we can refinish it without changing the color. Testing samples helps you see the options.

How long until I can put furniture back?

With oil-based polyurethane, wait about 3 days. With water-based finishes, drying is faster. We’ll give you guidance for your floor’s finish.

Call Today for a Free Estimate

If your floors are ready for a fresh start, we’d be glad to take a look. Call today for a free estimate at (484) 354-8869, or contact us online. For general homeowner guidance on wood floor finishes, the National Wood Flooring Association’s woodfloors.org is a helpful resource.

Call Now Button